Aluminum Flagpole Info

       As the standard of the industry, Anchor's Continental external halyard flagpoles offer a wide range of exposed heights and shaft strength, and finishes. Exposed heights range from 20' to 80'.  Multiple piece shaft sets are pre-fitted at the factory and use a self-aligning internal sleeve.

       All Continental shafts are made from seamless 6063-T6 high strength aluminum and are designed to meet the most exacting architectural standards.

       Standard fittings for the Anchor's Continental line include a revolving cast aluminum single halyard truck; a limited stretch braided polypropylene halyard;  snap hooks; 9" cast aluminum cleat; heavy gauge (.060) spun aluminum flash collar and a gold anodized, aluminum finial ball.

       Flagpoles with a 10" or 12" butt diameter are fitted with a heavy duty, sealed bearing revolving truck and stainless steel snap hooks.

       The ground set foundation sleeve is made of hot-dipped galvanized corrugated steel with self-centering wedges and an integrated grounding rod.

       The standard shaft finish is a deep luster polished finish. Other architectural finishes are available to include, clear anodized, dark bronze or black.    

 Need a freight quote, Click Here>   [email protected]  Please include, pole size, zip code that pole is to be shipped to state residential or commercial delivery site. Or simply complete you order and we will notify you of exact freight cost prior to charging your card.

        Our cone tapered ground set aluminum flagpoles are precision fabricated from new, 6063-T6 tubing utilizing the industry's most sophisticated, state-of-the-art manufacturing processes. The conical portion tapers approximately 1" in every 5.55 feet. Poles with overall lengths of less than 35' are shipped in one piece when possible.  Longer lengths are shipped in sections and will be factory fitted with a self-aligning sleeve which requires no field welding. Upon proper assembly a hairline joint is all that is visible.

      On Flagpoles under 50 ft tall add our dual sealed bearing for a lifetime of continued use. Tip: Remember to change your flagpole line when it shows signs of ware, it only cost a few dollars and is easy to do before it breaks. Once the line breaks you will need to get to the top of pole. With our dual sealed bearing truck the only maintenance required on external halyard flagpoles is to change the line when necessary and of course replace flags as required.
      All poles are double wrapped with protective paper and shipped in a hard fiber tube.